wnwinter
New member
I have a new wire welder and would like advice as to which wire to purchase for a newbie.
Wire advice
- Thread starter wnwinter
- Start date
SidecarFlip
Active member
- Messages
- 36
- Good Post Points
- 5
- Location
- SE Michigan
- Welder
- Hobart Handler 210, Lincoln Square Wave TIG, Vulcan 205 stand alone TIG, Hyper Therm CIC Plasma cutter, Titanium 45 amp Plasma Cutter, Lincoln Ranger gas driven ac/dc welder, Harris oxy-acetelyne cutting torch and welding torch, varuous owned shielding gas bottles and a bunch of other stuff....
Depends on what size spool your machine will accept. I use 10 pound spools on my Hobart but some machines will only take the smaller spools. Industrial machines will accept 50 pound spools. I use INE wire myself on 030 gage.
California
Well-known member
.030 up to what welding amps?
SidecarFlip
Active member
- Messages
- 36
- Good Post Points
- 5
- Location
- SE Michigan
- Welder
- Hobart Handler 210, Lincoln Square Wave TIG, Vulcan 205 stand alone TIG, Hyper Therm CIC Plasma cutter, Titanium 45 amp Plasma Cutter, Lincoln Ranger gas driven ac/dc welder, Harris oxy-acetelyne cutting torch and welding torch, varuous owned shielding gas bottles and a bunch of other stuff....
Actually used it for spray arc transfer at 215 amps, with 30 CFM of shielding gas.