Small tractor bumper

cpufixerjr

Active member
Messages
40
Good Post Points
33
Location
Tulsa, OK
Welder
Lincoln 225 AC
When I got the little kubota tractor, it had a piece of c-channel bolted on the front as a makeshift bumper. Due to lack of radiator protection, the radiator was damaged when I got it and the tractor overheated. After replacing the radiator I decided to build a proper bumper that I could easily put on and take off using just two wrenches and the cherry picker. I used C channel to extend it out a bit, then some scrap solid flat bar telecom tray to build a radiator protector. I added the D ring and chain hook so I can hook on and pull stuff with it if ever needed.

Over the past year I have been happy with it, still wanting to add some storage to it somehow so I can carry tools and 3 point pins.

I know some people like having a trailer ball on the front, I prefer to just have one on the box blade.

The kubota has been getting its work this winter pulling the log splitter around and moving square bales for my wife's goats.
 

Attachments

  • PXL_20220313_203316085.MP.jpg
    PXL_20220313_203316085.MP.jpg
    630.1 KB · Views: 9
  • PXL_20220313_203322447.jpg
    PXL_20220313_203322447.jpg
    418.4 KB · Views: 9
  • PXL_20220313_203327892.jpg
    PXL_20220313_203327892.jpg
    393.5 KB · Views: 9
  • PXL_20220313_211626152.jpg
    PXL_20220313_211626152.jpg
    794.7 KB · Views: 9
  • PXL_20220315_170314699.MP.jpg
    PXL_20220315_170314699.MP.jpg
    1 MB · Views: 10
  • PXL_20220315_171609017.jpg
    PXL_20220315_171609017.jpg
    1 MB · Views: 9

jjef

Active member
Messages
34
Good Post Points
22
Location
Mi
Welder
Hobart 210, lx 235, Lincoln 140c
Nice, I made one for my used and abused relic L4150 a few years ago when I replaced the rad, used repurposed channel, old tubes,
heavy gauge angle, added a front hitch. Even rattle canned it orange. Bent tubes with a 16 ton hf bender. Will probably reconfigure lights and add mesh in between grates when I pm in spring. One thing I learned when using HF bender use one or two size bigger dyes or the cheap ones will crack and shatter when the bend flares out the tubing.
 

Attachments

  • KIMG1609.JPG
    KIMG1609.JPG
    275.3 KB · Views: 10
Top