1st!

sea2summit

Active member
Messages
33
Good Post Points
15
Let’s get this party started.

Working a replacement goat feeder right now.
BD604EA7-8ADA-4711-834C-9EA42506077D.jpeg
Have a bunch of galvanized stuff I literally pulled out of a dumpster. Nasty stuff but it works.
FEB98E45-FA1E-4B28-88C3-50CFA9E7A77F.jpeg
Chopped.
792611F7-F34D-4EA1-B52F-75723A0AE719.jpeg
Had to think about hinges and how I wanted to hold the lid open.
255893F0-10DE-4C77-8257-DE7A9CA3809A.jpeg
Testing the upper limits of my skill level.
E35AEBCB-8E35-4812-B034-DEC88041BD46.jpeg
03A8EEBC-2FAF-4C9F-AB5E-7EEDBA0DDE1E.jpegProgress on day two.
594857DB-3C70-4636-B4DC-E2E4EF387FC7.jpeg
Day three.
May the power of gravity compel you!
C14CD0A1-91A1-4C63-8B3D-C24CE38A9D33.jpeg
Hopefully I’ll get it done tomorrow...only able to work about 3 hrs a day before it gets too hot around here.
C6688F9E-7FEA-47B2-B856-E3825737DC19.jpeg
Bonus track I pulled a rusty old sledge with a broken handle out of the same pile, she cleaned up nice.
48D22312-12A5-4461-B238-3E121DADFF79.jpeg
 

sea2summit

Active member
Messages
33
Good Post Points
15
Feed mesh, aka hog panel in.
C0AEC4EA-80B6-4465-8833-CF7AB52D5232.jpeg
Hinges out of the scrap parts box. Not bad for nothing but an die and angle grinder to work with.
188F8462-3B06-48A2-A01B-06BC926C98D8.jpeg
7D279728-1993-4BB2-94EE-960B094E910A.jpeg
63996F4F-4EE2-425A-9865-3A7DE7DC2CFB.jpeg
FA4577FF-D6A5-407A-813E-D026FD86B3F7.jpeg
Quick pressure wash and ready for the paddock.
D35A284A-8BB1-4EAD-8302-38F19ECB88B0.jpeg
18A759E6-C9B6-4140-B589-7D2A6D911773.jpeg
 
Top