Lincoln Welder Owner Check-In

Oliver 1555

Member
Messages
19
Good Post Points
6
Location
On the farm
Welder
Lincoln 225 AC stick, Lincoln 140 MIG, Lincoln 256 MIG, Lincoln Squarewave 200 TIG
Lincoln AC 225 I bought in 1972 when I was 16 years old.
Lincoln 140 MIG
Lincoln 256 MIG
 

chuckinnc

Member
Messages
6
Good Post Points
2
Location
Western NC
Yep, have the Lincoln 225 amp tombstone welder, cant begin to count the farm implements it has repaired over the years, but sense I retired 4 years ago It sets quietly in the corner while I piddly with the 120v mig on my smaller hobby projects
 

Chase

New member
Messages
2
Good Post Points
4
I have a portable Lincoln Weldanpower 225G7. Great machine. The only problem I've had with it is I had to replace the 4way bridge rectifier on it a couple times.
 

DAC

Member
Messages
10
Good Post Points
7
Location
Green Valley, east of Rapid City, SD
I have an old Lincoln weld-pak 155 mig. I'm sure it's a great welder, the operator, not so much---LOL! I've had it 10-12 years now. I'ts always done what I need on my garden tractors and old GMC trucks.
Pic I tried to load is too large.

DAC
 

Paul F

Member
Messages
9
Good Post Points
9
Location
Amherst, MA
i have a Lincoln SP-100T MIG i got 22 years ago and it's still my go-to welder for little stuff. runs great.
 

DAC

Member
Messages
10
Good Post Points
7
Location
Green Valley, east of Rapid City, SD
MC changed the picture sizing so I will try to show my welding setup again! Looks like it's going to work! I had that old red metal cabinet laying around the shop when I bought this welder used. Built an angle iron base with casters for the cabinet and sat the welder on it. It was flux core only and I used it that way for several years. 7 or 8 years ago i converted it to gas. Bought a solenoid off epay, Harbor Freight gauges, leased a tank and built the tank mount out of the handle cut off a discarded propane tank. It was just the right size for the tank to slip in to it. It's been very reliable, even though the operator has issues!

Linclon 155 019.jpgLinclon 155 020.jpgwelder 6-16-14 001.jpgwelder 6-16-14 002.jpg

Thanks MC!

DAC
 

CB

Active member
Messages
30
Good Post Points
37
I have four Lincoln power supplies (I think). At least four that I can lay eyes on right now. Power Mig 300, WeldanPower 225 Onan, and a couple of 40 year old AC225 tombstones. Seems to me I had another Lincoln floating around somewhere, but out of sight, out of mind. I've mostly used the PM300 for the last 17+ years.
 

Lis2323

Well-known member
Messages
98
Good Post Points
33
My two SA 200’s. One I sold a few years back. The other is out on permanent “loan” to a friend.

Adjustments.jpg
 
Last edited:

Lis2323

Well-known member
Messages
98
Good Post Points
33
My Lincoln Idealarc 250 AC DC.

IMG_7337.jpg
And Lincoln LN25 suitcase feeders.

IMG_1903.jpg
IMG_1846.jpg
 
Top